qpi-config

Copyright © Quectel Wireless Solutions Co., Ltd. 2026. All rights reserved.

qpi-config is a tool for configuring the features of the Quectel Pi M2 smart controller board. It supports the following functions:

  1. Query the temperature of system module units;

  2. Query the system CPU, memory, and storage status;

  3. Configure Wi-Fi.

Query System Module Unit Temperature

Run the following command to query the module unit temperature:

sudo qpi-config dump temperature
../../_images/image_Ej6mbjnOOozcnXx8OftccJhFn5g.webp

Query System CPU, Memory, and Storage Status

Run the following command to query the system CPU, memory, and storage status:

sudo qpi-config dump systemusage
../../_images/image_WYpHbS95IoQ8HhxO5yzciC7Znec.webp

Configure Wi-Fi

Run the following command to scan for Wi-Fi:

sudo qpi-config wifi scan
../../_images/image_NpwGbHrG6oAWHHxkdBucYHGInQf.webp

Run the following command to view existing Wi-Fi connections:

sudo qpi-config wifi show

Run the following command to add a Wi-Fi connection:

sudo qpi-config wifi connect <ssid> <passwd>

Run the following command to remove a Wi-Fi connection:

sudo qpi-config wifi remove <connection uuid>